your first service
We want you to get the best value. If you’ve already been quoted for the same work by a licensed contractor, we’ll beat it by 5%.
The fault that takes out your power, or starts a fire, usually runs hot for months first. A thermal imaging electrician in Melbourne can see that heat before it becomes a breakdown. Using a thermal camera, we scan switchboards, circuits and connections to find hot spots caused by loose terminals, overloaded circuits and failing components, none of which are visible to the naked eye. It is a fast, non-invasive way to catch trouble early.
Loose or corroded connections are one of the leading causes of electrical fires, and they heat up under load well before anything trips or smells. Thermal imaging shows us exactly which connection or component is running hot, so we can tighten, repair or replace it before it fails. It is especially valuable for older switchboards, busy commercial sites, and any property where a loss of power, or worse, would be costly.
The scan itself is quick and does not require shutting anything down, because we read the equipment under normal load, which is when faults show up. We give you a clear report of what we found, with images of any hot spots and our recommendations, so you have a record and a plan. Many businesses use thermal imaging on a regular schedule, and some insurers value it as evidence the electrical system is being properly maintained.
Thermal imaging pairs naturally with regular upkeep, so see Electrical Maintenance, and if a hot spot points to an ageing board see Switchboard & Safety Upgrades. We are licensed and insured, rated 5.0 on Google across 600+ reviews, and every job is backed by our lifetime workmanship guarantee.
You do not just get a thumbs up or a vague all-clear. We give you a report showing any hot spots we found, with thermal images and plain-language recommendations ranked by how urgent they are. Where a fault is straightforward, we can often repair it during the same visit, tightening connections or replacing a failing part. For anything larger, you have a documented plan and the evidence to act on it. It is a record you can keep, share with an insurer, or use to budget the work sensibly. We can also re-scan after a repair to confirm the hot spot is gone.
A connection can be dangerously hot and look completely normal, which is what makes electrical hot spots so risky. Our thermal camera reveals temperature differences across your switchboard and circuits, so a loose terminal, an overloaded run or a failing component stands out clearly. We scan the equipment under its normal load, because that is when faults heat up, and we know how to read the results properly rather than just pointing a camera and guessing. It turns an invisible, building risk into something we can find and fix on the spot.
No one likes waiting around for a tradie. When you book with us, we respect your schedule. We’ll even let you know when we're on the way.
We don’t believe in pressure sales tactics. We’ll explain what’s going on in plain English and only recommend what’s genuinely needed.
We bring the right tools and parts to get your plumbing sorted in one visit, whenever possible. That means faster fixes and less disruption for you.
No one likes a tradie who leaves a mess behind. From the moment we walk in, we treat your home like it’s our own. We always clean-up after ourselves when we’re done.
We’re not a faceless franchise — we’re Melbourne locals. All our plumbers are fully licensed, insured, and trained to handle anything from emergencies to service and installations.
We believe in fair, upfront pricing. That means No call-out fees, Clear quote before we start and zero surprises on your invoice.
Want to know what is running hot at your place? We provide electrical thermal imaging for homes and businesses across Melbourne, with much of our work around the northern suburbs such as Epping, Craigieburn, Preston and Coburg. Older homes through the inner north benefit from a scan of an ageing switchboard, while warehouses, shops and offices use it to catch faults before they cause downtime. The scan is quick, does not disrupt your day, and is one of the few ways to check the health of your wiring without pulling anything apart. You can also browse all our electrical services. Don’t see your suburb on the list? Give us a call, the chances are we’re nearby.
Call us now
What’s running hot in your switchboard? Thermal imaging scans by licensed electricians across Melbourne. Faults found before they fail. Call 1300 635 294.
